FFE SP2 Absolute Pressure Sensors

FFE SP2 Absolute Pressure Sensors

£179.95 £149.96 TAX FREE


FFE SP2 Absolute Pressure Sensors

SP2 Absolute Pressure Sensors

NOTE: Absolute Pressure Sensors are intended for atmospheric referenced sources.  I.E. Intake manifold, barometric, or exhaust pressure.  A gauge sensor should be used for liquid line pressure such as fuel, oil, coolant pressure.

Thread: 1/8″ NPT

Housing Material: 316 Stainless

Response Time: <1ms

Output: .5-4.5 VDC

Input: 5 VDC

Operating Pressure:

SP2-3A : 0-300 kPa (0-43.51 Psi)

SP2-5A : 0-500 kPa (0-72.52 psi)

SP2-7A : 0-700 kPa (0-101.52 Psi)

Operating Temp: -40C – 125C ( -40F- 257F)

Compensated temp. Range: 0C ~ 85C (32F ~ 185F)

Operational Media: Liquid/Gas

Shock: No Change @ 10g RMS (20Hz-2000Hz)

Impact: 100g ,11ms (Max)

Accuracy: 0.5% FS

Non-Linearity: 0.05%FS (Typical) ,0.025%FS (Max)

Repeatability: 0.05%FS (Typical),  0.075%FS (Max)

Hysteresis: 0.05%FS (Typical), 0.075%FS (Max)

Each sensor has been individually calibrated and tested and include a serial matched data sheet as well as 3 pin female connector kit.

Additional information

Weight 1 kg
Dimensions 25 × 25 × 25 cm

Have a Question? Submit it here!



By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.