FD3S RHD AEM Smart Coil Brackets

FD3S RHD AEM Smart Coil Brackets

£50.00£469.96

Description

RX7 FD3s RHD IGN1a / AEM Smart coil bracket

Better photos to follow

  • Made In The UK
  • For RHD Car only
  • Will not fit cars with ABS systems
  • CNC 3mm Steel Powder coated to color of choice
  • Made on order, Orders can take upto 14 days to ship out normal lead time is 2-5 days
  • Worldwide Shipping Via Fedex
  • 8.5 MSD 8.5 Super conductor leads TGS have been dealers for MSD since 2007
  • M6 Stainless steel coil to bracket bolts and hand lathed aluminium spacers.
  • VAT paid on EU orders only
  • Standard color Black , We will always try and keep this main color in stock but due to product launch please allow the std processing days above.

Finally a solution on mounting the very popular AEM Smart coils off the engine away from heavy vibration and heat transfer. 

Save Save Save

When you buy the coil bracket and a set of MSD 8.5 plug leads you save £15.00 off the £95.00 RRP of the MSD plug leads.

These brackets are design and cut via CNC right here in our workshop based in Stockport, Greater Manchester. Years of experience in modifying and tuning these legendary RX7s has given us the edge over the competition. Each MSD lead we produce is tested to make sure it meets our high standards before packing and shipping.

This part is made to order lead times 2-14days days

AEM Smart Coil information :

AEM’s High-Output IGBT “Smart” Inductive Coils each deliver up to 103mJ of spark energy and a minimum of 40,000 Volts—as much as most CDI systems but without the need for a CDI module! These coils provide very long spark duration at full energy, unlike CDI systems and multiple spark systems which fire off small spark events prior to and after its CDI burst to mimic longer spark duration. The full energy delivery and long duration of AEM’s High-Output IGBT “Smart” Inductive Coils eliminate the need to compromise energy or duration with your ignition system, and will increase performance in high-boost or high compression engines.

  • Massive Spark Energy, up to 103 mJ
  • Incredibly long spark duration, up to 2.9mS
  • Up to 40kV Output Voltage, without using a CDI
  • Deliver CDI-like spark energy—No CDI Module needed
  • Cost less than aftermarket LS1 coils
  • Can be mounted almost anywhere
  • Weather and Shockproof design
  • Can be mounted directly to the Engine

TECHNICAL SPECIFICATIONS

  • Output (no load): 40kV minimum
  • Output (50pF load): 40kV +/- 10%
  • Output Energy: 103 mJ +/- 7%
  • Peak Secondary Current: 102 mA +/- 10%
  • Arc Duration: 2.9mS +/- 10%
  • Turns Ratio 71:1
  • Maximum Current: 19 Amps
  • Maximum Battery Voltage: 17 Volts
  • Base Dwell: 3.0 mS
  • Max Continuous Dwell: 9 mS but don’t exceed 40% duty cycle
  • Max Intermittent Dwell: 80% duty cycle, 5 seconds maximum
  • Mating Connector: Packard/Delphi 12162825 “Pull to Seat”
  • Mating Contacts: Packard/Delphi 12124075 “Pull to Seat”
  • High Tension Wire Terminal: HEI “spark plug top” Style

 

Additional information

Weight N/A
Dimensions N/A
Color

Black, Red, Yellow, Blue, White

MSD 8.5 Coil plug Leads

+ £80.00, Not included 

4 x AEM Smart coils

+ £319.96 inc VAT, Not included 

Have a Question? Submit it here!

*
*

*

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close